Home » Posts tagged 'server 2008'

Tag Archives: server 2008

Addressing P2V 0x7b Issues

The other night I was P2Ving several systems and on one I ran into the issue of it blue screening on boot. It is unfortunate but not too uncommon as usually you need to enable IDE drivers on the system prior to the P2V. Microsoft’s article here works for all versions of XP and Server 2003, though I found I needed to expand the mentioned drivers directly from the cd for the SBS system I was working. That unfortunately did not resolve my 0x7b blue screen the other night. This article turned out to be the key to what I needed. Now the part that neither of these mentions is how to fix the problem if you can’t even boot that VM, so as to avoid having to do another P2V of the system. With Server 2008 this is possible to avoid and it can save you a lot of time, especially if the systems are large.

Server 2008 contained a great feature of being able to mount VHDs which is what we’ll be doing. For the first method you’ll want to mount the VHD to a drive letter and then expand the drivers to the \windows\system32\drivers folder in the VHD. Pull up regedit and select the HKLM key. Go to File->Load Hive and open the system registery from the \windows\system32\config\ and give it an easily identifiable name. You’ll find the registery loaded in HKLM under the name that you gave. Now loading the registery this way you won’t find a CurrentControlSet under the SYSTEM key. CurrentControlSet is just a pointer to ControlSetxxx. To find out which ControlSet number the system is set to boot with look ing SYSTEM\Select. The Current dword contains the number that it is using which in most cases will be 1, so go into that particular ControlSet i.e. for 1 it will be ControlSet001. In there you can manually implement the keys from the first article or the second article. In the case of the problem I ran into I had to set the Group Value of wdf01000 to WdfLoadGroup as it was part of the base group. If you want to learn more about service orders take a look at this article and this article.

Once done with those changes unload the hive and close out of regedit. Dismount the VHD and your virtual machine should be good to go.

%d bloggers like this: